- Extremely robust
- Close loop control with temperature sensor or CAN (temperature sensor prioritized)
- Configurable through CAN or EMP Service Tool
- Diagnostic capability
- Fully protected (transients, short circuit, and reverse batter)
- Full variable control through CAN
- Behaves as on/off controller in absence CAN
- 12/24 VDC
- SAE J1939 compliant
- Size (L x W x H) - 5.03" x 5.64" x 2.36"
- Weight - 2.4 lbs.
- IP Rating - IP67, Submersible
- Rated Voltage - 9 to 32 VDC
- Rated Current - 20 amps continuous
- Quiescent Current Draw (Ignition Off) - < 300 uA
- Quiescent Current Draw (Ignition On) - < 200 uA
- Operating Temperature - -40 to 105° C
- Storage Temperature - -40 to 125° C
-
I/O Connector A (Mates with Deutsch DTM06-6S (E007))
| Pin1: |
CAN HI |
Pin4: |
TX |
| Pin2: |
CAN Shield |
Pin5: |
RX / Press Sw In |
| Pin3: |
Thermistor Return |
Pin6: |
CAN LO |
-
I/O Connector B (Mates with Deutsch DTP06-4S (E003))
| Pin1: |
Thermistor IN |
Pin3: |
Battery |
| Pin2: |
GND |
Pin4: |
Ignition |
- I/O Connector C (Mates with Deutsch DTP04-4P)
- Once channel of CAN (SAE J1939 Compliant)
- Control through CAN or temperature sensor
Feel free to download the following informational product documents and guides. You may need to install Adobe Acrobat
Reader to view these documents. You can view more documents relating to this product in our Product
Support section.
You can also download Product Documents, view our Support KnowledgeBase,
and download other useful files in our Drivers & Downloads section.
EMP has identified several markets for which its' products fit the application necessary within that market. Below
is a list of those markets that fit EMP's products including a brief description of that application.
Sorry, no markets have been loaded for this product.
The photo gallery is intended to showcase EMP's products in the field, being tested, or simply highlight the market
applications suiteable for that particular product.
Sorry, no photos have been loaded for this product.
