The constant exchange of used oil with clean oil keeps the oil quality at a constant cleanliness level. This eliminates the extreme oil quality conditions experienced with manual oil changes at pre-determined intervals.

Because the engine oil is kept at a constant oil quality with the OilMate™, the oil change interval of the engine can be extended. Stationary engine applications can be extended to 4,000 hours between oil changes. With the use of oil analysis oil change intervals can be extended further.

With the additive package of the engine oil constantly being replenished with the addition of clean oil, the additives which keep the oil particles from forming together are not depleted. This keeps the particles from clogging up the oil filter, leading to the need to change the oil filter. Therefore, the interval between oil filter changes can be extended.

With the extension of the oil and oil filter change intervals, the amount of used engine oil and oil filters that need to be disposed of is greatly reduced. On approved applications, allowing the mixing of the engine oil with the fuel to be burned off in combustion, the disposal of used engine oil is eliminated.

With the engine oil at a constant cleanliness level from the continuous addition of fresh engine oil into the lubrication system, the engine is protected better over the long run. With OilMate™ installed, the engine oil never reaches a contamination level that is harmful to the engine.

With the extension of engine oil and oil filter change intervals, your equipment does not need to be taken out of use for service as often, therefore your productivity will be increased. Equipment that is being used continuously or in remote applications no longer needs to be tracked down and taken out of service for routine oil changes. Maintenance personnel can now spend more time on other value added service tasks rather than routine oil changes.

On approved engine applications where the used engine oil is added back to the engine and mixed with the fuel at the fuel return line, the used engine oil is now used as productive energy rather than having to be disposed of along with your other disposal material.

The OilMate™ comes with a controller that has an Adjustable Oil Exchange Rate. Based on the engine size and recommended oil change interval of the engine, the cycle time of the controller is adjustable. Therefore, the same OilMate™ package can be used will all engine sizes.

OilMate™ kits come in both 12 and 24-volt versions to allow for easy installation on most vehicles by eliminating the need for an auxiliary power circuit. Units are also available in burn and make- up, burn only, and other customizable options to best fit the needs of the customer.